ODEON 12 Features
ODEON 12 was an important release with attractive enhancements:
- Integrated measuring system for room impulse responses, which will allow you to measure a room and compare measurements with simulations, inside the same software.
- Support for ISO 3382-3 Open Plan Offices – Measurement of room acoustic parameters. Part 3.
- Grouping receivers in the multipoint response, making it possible to obtain data and graphs for selected receivers.
- Advanced generation of sources/receivers, with a constant height above a complex sloped floor/ground.
- Two types of radiation: Lambert and Spherical is allowed now for line and surface sources. (Industrial and Combined editions only).
- Level calibration of the input signals in the multi-channel convolution, according to the A-weighted loudness (Auditorium and Combined editions only).
- Calculation of the IACC parameter, which quantifies the quality of spatial impression (Auditorium and Combined editions only).
Integrated measuring system
Odeon A/S is making a big step this year by introducing a measuring system in the ODEON simulation software. From now on you will be able to perform room acoustic simulations and impulse response measurements inside the same environment. No extra pieces of software are needed any more for a complete project. Just measure, simulate and compare the results side by side! The ODEON measuring system can be used either together with a room model or as a stand-alone tool. The impulse response is derived by deconvolution of sweep signals.
The measuring system encompasses the following features:
- Low-distortion and zero-phase octave band filtering in accordance with the IEC 61260 (1995-08) standard.
- Automatic detection of onset time.
- Automatic detection of noise floor per octave band individually.
- Same display of decay curves as in the single-point response.
- Correction for truncated energy as in simulations.
- Derivation of all ISO 3382 parameters.
- Importing measurement results directly into the muli-point response for a direct comparison to simulations.
- Sound strength calibration.
- Various settings concerning type of source/receiver and processing of the impulse response.
Support for ISO 3382-3 Open Plan Offices
ISO-3382-3 for open plan offices is fully supported now in ODEON. All spatial parameters can be displayed both in terms of simulation and in terms of measurement. In the following example the STI parameter versus distance is displayed.
In the multi-point response there is now the option to make groups of receivers and work with the results individually. In the following example all results are displayed for receivers 1, 3, 4 and 5 only. The same grouping was used for the figure in Support for ISO 3382-3 Open Plan Offices.
Advanced generation of sources/receivers
During tabulation of sources and receivers an align expert can be used so that each source/receiver is placed with constant height above the surfaces. This facility can be successfully used for automatically generating audience above surfaces with inclination.
Different radiation types of surface and line sources
Now both Lambert and Spherical radiation can be chosen for a line and a surface source. The sound radiation is implemented by numerous point sources distributed over a line or a surface. Each of these sources shouts a ray towards a random direction. When Lambert is chosen for the radiation, the strength of each ray is proportional to the cosine of the angle between its direction and the normal. Practically, rays radiated parallel to the surface have zero strength. Whereas rays perpendicular to the surface carry the maximum of the energy. Spherical radiation introduces uniform strength to the rays, no matter their direction.
Lambert radiation is preferable for normal surface sources, such as noise emission from machinery. Spherical radiation is recommended when several point sources are modeled as a surfaces source instead of each one individually (e.g. many people distributed over a large canteen hall). Sphericalradiation is also a good option for modelling traffic noise, which can be regarded as a dense array of vehicles, acting as individual point sources.
Input signal level calibration
Adjusting the correct level of signals in a mix of convolutions might have been a tough task so far. In many cases you would like to have equal input levels for two sources in a multi-channel convolution. Such an example can be two human speakers placed at different distances from the receiver. The speakers are supposed to speak at the same level and only the distance from the receiver should be taken into account for the simulation. If the anechoic signal is not the same for the two speakers, it is very difficult to set a “normal” level of speech for both, manually. ODEON now does it for you, by calculating the average A-weighted loudness of the signals and equalizing them afterwards. You can activate this process by clicking on the calibration button, within from the offline convolution window.
Calculation of IACC
The IACC (Inter-Aural Cross Correlation) coefficient provides an indication of the spatial impression in a concert hall, which can be perceived either as a broadening of the source or as a listener envelopment. The IACC coefficient is described in Annex B of ISO 3382-1.